Auriga - Optronics Test - Test & Measurement Products - OPTVFL

To contact AURIGA phone 0870 121 9990 fax 0870 121 9991 or email | if you have any problems or feedback please direct them to the webmaster

Auriga Logo

Optronics Test

Optronics Overview

Optronics Test & Measurement Products

OPTVFL Visual Fault Finder

Ordering Information 6

The OPTVFL is a compact but powerful visual fault locator designed to troubleshoot faults on fibre optic cables. Light generated by this unit will escape from sharp bends and breaks in jacketed or bare fibers, as well as
poorly mated connectors. It can also identify faults in fiber optic jumper cables, distribution frames, patch panels, and splice trays.

The OPTVFL is an excellent addition to an engineers tool set because it can locate broken fibre inside the OTDR’s dead-zone. Being portable and light it lends its self to other applications include end-to-end continuity checks, identifying connectors in patch panels and fibers during splicing operations. The universal connector interface provides fast operation with many connector styles without changing an adapter.

650nm visible red laser source
Compact size
Universal connector interface for quick connection
High power (1mW)

Technical Specifications

OPTM AUTO specifications
Optical	OPTVFL
Emitter type	Laser (FDA and IEC Class II)*
Wavelength	650 nm ± 10 nm
Output power	1 mW (into single-mode fi ber)
Modulation	2 Hz or CW selected
General
Connector type	Universal adapter (2.5 mm included)
Power	2 AA alkaline batteries (60 hours typical)
Operating temperature	10 to 35°C, 85% humidity non condensing
Storage temperature	0 to 50°C, 95% humidity 0 to 50°C, 95% humidity
Size	(H x W x D) 5.5 x 2.4 x 1.3 in (14.0 x 6.2 x 3.2 cm)
Weight	7.06 oz (< 200 g)

* Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
All specifications at 25°C

Ordering Information

Descripton	Part No	Stk Code
OPTVFL Visual Fault Identifi er, Instruction Card and Carrying Case.	OPTVFL	184-56C