Features and benefits

No specific tooling required (Only drill and corking/ sealant gun).

No specialist training required.

Permanent seal by compartment (can be re-entered through other compartments).
No hidden costs.
Sealant and dome accredited to LN450 & RoHS compliance.
Versatile mounting positions.
1 – 96 Fibre capacity.
Sealant goes off in 20mins leaving a water tight seal.

Materials

Dome, adaptor plug, universal fixing bracket and fixing pins -environmentally friendly, UV resistant polypropylene collar clamping assembly -glass filled nylon blend base -polycarbonate / ABS blend.

Vertical Mounting Position
(Wall/Wooden Pole)

Horizontal Mounting Position
(Wall/Wooden Pole)

Mounting to Cable Bearer

Performance Specifications

Reference specification British Telecom LN 450B

Water & air tightness BT Ref LN 450 5.2 Result No Pressure Loss.

Temperature cycling in water BT Ref LN 450 5.4 Result No Pressure Loss.

Axial 1000 newton pull test BT Ref LN 450 5.7 Result No Pressure Loss.

Water immersion test BT Ref LN 450 5.5 Result No Pressure Loss

Sealant for Dome enclosures

Our Sealant is a unique polyurethane sealant for the Telecommunication industry, to ensure joints and cables are effectively sealed against the ingress of water and water vapour. The sealant is dispensed from a hermetically sealed 170ml co-axial cartridge system, once mixed through the mixing nozzle and applied the sealant is an inert material. And cures inside the 15 minute short term “MEL” permitting the closure to be fl ash tested to prove the integrity of the installation. The specially developed co-axial cartridge allows greater control over the application of the sealant and reduces sealant wastage as the
cartridge can be re-sealed. This sealant is fully compliant to meet the stringent requirement of COSHH.

• Passes BT LN450 Closure Performance Specification

• Passes BT RC9302 Water/Gas Blocking Specification

• Gas Blocking of the sealant in external joints to BT specification RC9307, Result No Pressure Loss.

• Temperature cycling in water testing of the sealant to BT specification LN 450B Result No Pressure Loss.

Curing temperature +45°C.

Flash testing can commence 15 minutes after sealing application.

COSHH compliant.