To contact AURIGA phone 0870 121 9990 fax 0870 121 9991 or email | if you have any problems or feedback please direct them to the webmaster

   home | about | contact | e-catalogue | products | special offers | news | archive | press | site map   

 

Noyes Products

Noyes Overview

 

Noyes Networks Test & Measurement Equipment

 

VFS 1 - Video Fibre Scope

 

VFS 1 - Video Fibre Scope 

Features:

  • Easy-to-inspect small form factor connectors

  • In-place inspection of fibre optic connectors

  • Active matrix display

  • 0° or 60° probe-arm angle

  • Portable and workstation models

  • Battery or AC power

  • Internal charging

The VFS 1 is a portable video microscope designed to inspect fibre optic connectors through bulkhead adapters. The VFS 1 can be used to inspect fibre optic connectors installed in patch panels, distribution frames, network equipment, and test equipment. It consists of an inspection probe with an internal LED coaxial light source, a miniature CCD video camera, and a high-resolution active matrix LCD display unit.

The front arm of the probe may be used in two positions: straight or 60°. The focus control is located at the rear of the probe. This allows the user to easily focus the probe even while inspecting connectors on equipment back planes or densely packed patch panels. The probe accepts adapter tips that can be quickly changed when inspecting different connector types.

The size and resolution of this display and the resolving power of the optics used in the probe allow detection of pits, scratches, and contamination within the polished end of 125µm fibre. In addition, a wide field of view allows inspection of the surrounding ferrule to a diameter of at least 250µm. A video output is provided for an external monitor. All VFS 1 models include a video probe, carry case, AC adapter, and user's guide. The VFS 1 and VFS 1-CE also include a display unit with internal charging, neck strap, and one rechargeable lead-acid battery. The VFS 1-PC and VFS 1-PCE also include an Interface Unit and (4) AA alkaline batteries

Specifications

 

Models VFS 1C UFS 1C-CE VFS 1C-PC UFS 1C-PCE
Configuration Probe + Display Unit Probe + Interface Unit
CE Marking No Yes No Yes
Video Output NTSC PAL a NTSC PAL
Image Specifications
Display Size (Display Unit) 5-inch .(13 cm) Active LCD. N/A
Magnification (using Display Unit) 300X N/A
Display Unit
Magnification Using an External Display Depends on display size. Example: > 250x with a 9-inch (23-cm) or larger display
Battery Type Rechargeable lead-acid (4) AA alkaline
Battery Life > 1 hour > 4 hours
Internal charging Yes N/A 
AC Adapter 120VAC 100-240 VAC 120VAC 100-240 VAC
  60Hz 50-60Hz 60Hz 60 Hz
General Specifications
Size: Probe 1 x 1 x 15 in (2.5 x 2.5 x 38 cm)
Size: Display / interface Unit 5 x 8 x 3 in (13 x 20 x 7.6 cm) 4 x 7.5 x 2 in (10 x 19 x 5 cm) 
Weight: Probe 7 oz. (0.2 kg)
Weight: Display/ Interface Unit 4 lb (1.8 kg) 1lb (0.45 kg)
Temperature 0° to +40° C
Storage Temperature -10° to +60° C
© AURIGA (europe) PLC 2004, E&OE | last updated 27-10-05 09:10 | Privacy Statement | Site Map | Help