|
Noyes Networks Test & Measurement Equipment
|
 |
SMLP 5-5 - Fibre Optic Loss Test Kit |
|
SMLP 5-5 - Fibre Optic Loss Test Kit
Features:
-
Multimode loss testing at 850 and 1300nm
-
Single-mode loss testing at 1310 and 1550nm
-
Certify 50 or 62.5µm multimode fiber links
for any 850 or 1300nm application, including Gigabit Ethernet (GBE)
-
Includes 50 and 62.5µm mandrels
-
Power meter stores 500 test results per
wavelength
-
Transfer test results to a PC
-
Field portable, battery operated
-
N.I.S.T. traceable
|
 |
|
The SMLP 5-5 Test Kit combines an OPM5-2C Optical Power Meter and an OLS4 Optical Light Source. The OLS4 is a four-wavelength stabilized Optical Light Source. It contains a Singlemode (SM) Class I laser source port and a Multimode (MM) Class I LED source port.
The OPM5-2C is a full featured Optical Power Meter calibrated at 850, 1300, 1310, and 1550nm. Both instruments are lightweight, hand-held, and operate from 9V batteries.
The OPM5-2C measures insertion loss (attenuation) in dB and power in dBm or W. The OPM5-2C can store 500 test results per wavelength.
With the supplied PC software, saved test results can be transferred to a PC for storage, printing, and analysis.
The SMLP 5-5 is ideally suited for testing fibre optic networks with hybrid (singlemode & multimode) cables. |
|
Specifications
|
Optical Power Meter |
OPM 5-2C |
|
Calibration Wavelength |
850nm |
1300, 1310, 1550nm |
|
Tone Detection Range |
+6 to - 30dBm |
+6 to - 35dBm |
|
Tone Detection Frequency |
270 ±13.5Hz |
|
|
1000 ±50Hz |
|
|
2000 ±300Hz |
|
Detector Type |
Germanium (Ge) |
|
Measurement Range |
+6 to -60dBm |
|
Accuracy (@ 25°C & -10.0dBm) |
±0.25dB |
|
Resolution |
0.01dB (0.1dB selectable) |
|
Measurement Units |
dB, dBm, µW |
|
Adapter caps |
Order separately (ST, SC, FC, and others available) |
|
General Specifications |
|
Power |
9V Alkaline, optional AC Adapter |
|
Battery Life (at 25°C) |
>30hrs. typical operation with 9V Alkaline |
|
Operating Temperature |
0 to 50°C |
|
Storage Temperature |
-30 to 60°C |
|
Size (H x W x D) |
5.5 x 3.2 x 1.5in (14.0 x 8.1 x 3.8cm) |
|
Weight |
0.56lb (0.26kg) |
|
Relative Humidity |
0 to 95% (non-condensing) |
|
Optical Light Source |
OLS 4 |
|
|
MM Optical Port |
SM Optical Port |
|
Wavelength |
850 ±30nm |
1300 -10/+50nm |
1310 ±20nm |
1550 ±20nm |
|
Emitter Type |
LED Laser |
|
Output Power |
> -20dBm* 62.5 µm Multimode** |
|
Spectral Width (typical) |
55 nm |
5 nm |
|
Optical Connectors |
SC (FC & ST available) |
SC (ST available) |
|
Stability |
±0.1 dB/8 hrs. ambient*** |
±0.1 dB/1 hr. ambient*** |
|
General Specifications |
|
Power |
9 volt alkaline, optional AC Adapter |
|
Battery Life |
Typical 16 hours with one output enabled |
|
Operating Temperature |
0° to 50°C |
|
Storage Temperature |
-30° to 60°C |
|
Size (H x W x D) |
5.5 x 3.2 x 1.5in (14.0 x 8.1 x 3.8cm) |
|
Weight |
0.64lb (.29kg) |
|
* Adjustable ± 1 dB |
|
|
|
|
|
** Output power will be about 3 dB less if a 50 µm mandrel-wrapped
jumper is used instead of a |
|
62.5 µm mandrel-wrapped jumper. |
|
|
|
|
*** After 20 min warm up, assuming unit was stored at ambient
temperature for one hour previous. |
|
Otherwise, one hour warm up for thermal stabilization. |
|
|
|
|
|
