The Austin Taylor Lift-off Door Cabinets are heavy duty distribution cabinets manufactured in ferritic stainless steel.

The flush fitting lift-off door is secured by 4 individual locks for enhanced security.

The cabinets are provided with backmount frames to support industry standard IDC strips. Cabinet capacities are calculated using 10 pair strips.

Material
Ferritic stainless steel throughout. Stainless steel fixings are used throughout.

Roof
Pitched roof in 2mm thick material welded to body.

Body
2mm thick ferritic stainless steel.

Base
2.5mm ferritic stainless steel.

Door
Single flush-fitting door (both sizes). 2mm thick ferritic stainless steel.

Latches
Total of four x half turn compression locks.

Protection
Cabinets are rated to IP55.

Backmount frames
1200 pair
Three x 41 way verticals

2400 pair
Six x 41 way verticals

Backmount capacities incorporate one extra position to allow labelling of each vertical using a label strip (not supplied).

Wire Management
Four large capacity jumper rings per backmount vertical

Earthing
M6 brass bolt for equipment earth.

Ventilation
Cabinet vents through concealed openings in the roof.

Finish
Pre-treatment by chemical etching followed by powder coating with polyester material in customers choice of colour (standard is green). Alternate colour finishes and silk screened or embossed logos are available on request. The semi-gloss finish enables graffiti to be removed using mild solvents or mild abrasive compounds. Damage can be touched up using brush or aerosol techniques. Repainting is best achieved using two pack poly-urethane compounds although gloss paint can be used. Backboard and base are self colour galvanised.

Dimensions and Capacities