The Austin Taylor 3A Cabinet is a heavy duty cross connection cabinet manufactured in ferritic stainless steel. Its one-piece construction gives added strength and allows one-operation installation.

The cabinet is supplied as standard with heavy duty stainless steel latches and there is provision for secondary security locks.

Roof
Pitched roof in 1.5mm thick material bolted to body. Alternate roof styles can be provided on request including flat, high pitched or steep slope versions to dissuade climbing or sitting on cabinet. The bolted construction enables the roof style to be changed retrospectively where conditions dictate.

Body
Fully welded one piece construction in 1.5mm thick material.

Base
Integral base as standard to enable single operation installation. Removable bases available on request.

Doors
Interlocking hinged double door arrangement. When opened to 180 degrees doors can be lifted off for additional access. Stainless steel door stays retain the doors at 90 degrees.

Latches
Stainless steel latches with nylon pawls operated by heavy duty tee-bar keys in a variety of vandal resistant standard shapes. Additional customised styles are available. O type ring seals within the latch body ensure lifetime lubrication and IP65 performance. Latches are tested to withstand a test requirement of 50NM. Provision is made for secondary security locks to be fitted on assembly or retrospectively by the end user with removable blanking covers fitted to standard profile cut-outs. Fitment by end user ensures controlled access.

Door seals
Replaceable synthetic rubber car boot type seals are used throughout.

Protection
IP55 in standard format. Doors are bonded to body with heavy duty cable. A brass earth connection stud is provided for cabinet and equipment earth.

Backboard
Galvanised steel , stainless steel, aluminium, marine ply or chipboard backboards are available on request. Star punched or custom punched units are available in all of the metal versions.

Ventilation
Convection currents draw fresh air in through louvres at sides of cabinet forcing warm air out through concealed vents above the doors. Side vents are protected by insect-proof mesh.

Finish
Pre-treatment by chemical etching followed by powder coating with polyester material in customers choice of colour (standard is green). Alternate colour finishes and silk screened or embossed logos are available on request. The gloss finish enables graffiti to be removed using mild solvents or mild abrasive compounds. Damage can be touched up using brush or aerosol techniques. Repainting is best achieved using two pack poly-urethane compounds although gloss paint can be used.

Dimensions