The AT200 is a 20/30 pair connection box which accepts standard 237A IDC connection strips.

Full wire management features are built into the base and the cover provides ample knockouts for cable entry.
 The standard lid height (Dimensions 159mm x 143mm x 50mm) accepts standard 237A's fitted with designation strips 51A.

The deep lid (Dimensions 159mm x 143mm x 76mm) provides extra height to accommodate the Protector Mount 5B.

The lid is secured by captive screws ensuring that access is impossible without a tool (a BABT requirement). The screws will not fall out and get lost during installation.

The lids each have a total of 8 cable entry points which are designed to interface with standard 16x16mm or 25x16mm trunking giving the neatest possible installation.

The base has a central rear cable entry point to allow totally hidden wiring and even provides fixing holes to fit a standard BS3662 size UA1 (LJ3) backbox.

Labelling is fully supported with space for designation strips 51A as well as a labelling area inside the lid with sections for all 30 pairs.

 The AT200 series offers optional safety and functional earth points. These are separate in line with best practice.

The AT200 is available with a 2 or 3 way backmount frame. It can also be supplied complete with 237A (10 way IDC) strips.

Variants with standard height lid are available in light grey (3P) to match other connection boxes (e.g. 250 & 300 Series) or in white (1P) to match line jacks, backboxes and trunking. Deep lid variants are all light grey.