|
Austin Taylor Connection Blocks
|
 |
237A IDC Connection Strip |
237A IDC Connection Strip
|
The 237A is a 10 pair insulation displacement connection (IDC) strip that is widely used within the telecommunication industry. They incorporate test and disconnection facilities as well as convenient fixed and local wire management services.
Typically mounted on a backmount frame and capable of accepting up to 2 wires per contact, a wide range of complimentary accessories is also available and can be supplied in a variety of Austin Taylor enclosures, including plastic connection boxes, metal connection boxes and distribution frames as well as street cabinets.
In addition we can provide factory tested pre-wired systems for maximum ease of installation.
Technical
|
|
|
Termination: |
Dry,gas tight, insulation displacement |
|
Wire Sizes: |
|
Solid
Conductor:
Solid Conductor:
Stranded: |
0.4-0.6mm (upto 2 conductors)
0.65-0.9mm (single conductor only)
7/0.15-70.25 (23-50AWG) |
|
Reterminations |
(using same size conductor) |
|
0.4-0.65
0.7-0.9 |
>99
>9 |
|
Wire Pullout Force |
10.5N |
|
Retention |
75% conductor breaking force |
|
Materials |
|
Plastic:
Contacts: |
ABS
Brass, Silver plated |
|
Dielectric Strength |
>2kV rms |
|
Surge Current: |
|
Disconnect:
|
5KA 8/20µs |
|
Connect
|
10kA 8/20µs |
|
Termination Resistance |
<1m Ohm |
|
Capacitance |
<5pF @ 100KHz |
|
|
|
|
